China OEM 2200w3000w electric ATV drive shaft electric motor

Maximum Torque(Nm): 20-40Nm
Wheelbase: ≤600mm, 1420mm
Brake System: Front disc+Rear dsic
Maximum Speed: 50-75Km/h
Driving Type: 2WD
Differential Lock: Unequipped
Charge Time(h): 3-5h
Grade Ability: ≥25°
Driving HangZhouage: 70-90km
Transmission System: Shaft Drive
Power: > 1000W
Voltage: 60V
Transmission Type: Manual
Color: Green
Battery: 60V 20AH
Max speed: 70Km/h
Transmission: Shaft Drive Transmission
Motor: 60v 2200w
Charge Time: 6-8h
Load capacity: 500kgs
Start mode: Electric Start
Product size: 204*121*131cm
Packaging Details: steel rack+ carton

Company InformationOur company is specialized in producing electric cars and motorcycles, including children’s electric cars and small off-road vehicles. We have a complete production line and professional team, you are welcome to order
The following is a picture of other products of our company. If you are interested, High effciency gearbox s series SA87 miniature cycloidal reducer worm gear box for mixer machine I can introduce you in detail.

1. Motor: 60V2200W2. Motor: 2200W U-Nite Brushless Motor3. Battery: 60V20ah lead-acid battery4. Motor speed: 3800rpm5. Maximum HangZhouage: 30 kilometers (can be charged once)6. Gear position: CZPT 1 intermediate air back 1 (high speed medium speed low speed)7. Transmission mode: shaft drive8. Charging time: 6-8 hours9. Brake system: hydraulic disc brake after front drum brake10. Climbing ability: 40 degrees11. Tire Size: Front and rear aluminum wheels 235/30-1212. Front and rear wheelbase: 1420mm13. Front wheel Width: 870mm14. Rear wheel Width: 980mm15. Seat height from the seat cushion: 820mm16. Foot seat: 500mm17. Maximum speed: 70 roads per hour18. Maximum load: 500 kg19. Vehicle size: 2040x1210x1310mm12. Packing Size: 1720*970*850mm21. Gross weight / net weight: 310/280 kg22. Number of containers: 20 small cabinets / 20 units 40 flat cabinets / 38 units 40 high cabinets / 42 units23. Shock absorption front and rear airbag damping

FAQ1. Q: Can I get some samples? A: We are honored to offer you samples for quality check.
2. Q: Do you have the products in stock? A: No. All products are to be produced according to your order including samples.
3. Q: What’s the delivery time?A: It usually takes about 25 working days to produce an order from MOQ to 40HQ container when we received your deposit. But the exact delivery time might be different for different orders or at different time.Pls confirm the delivery time with our saler.Thanks
4. Q: Can I mix different models in 1 container?A: Yes, different models can be mixed in 1 container, but it only can mix 3 models in 40″HQ.5 Q: How long is the delivery day?A: 15-35 working days after we received the advance payment at sight. 6 Q: What’ Speedy SPY-TL02 agriculture machinery tiller 6.5hp gasoline power tiller s your payment terms?A: 100% paid in advance to start production for amount less than USD5000; 30% paid in advance, 70% balance paid since the goods finished, before delivery for bulk order.
7 Q: What’s your shipping terms?A7: Because the products is with big volume, 2070 italy type style belt air compressor 3hp head 300l so we are suggust to shipping by sea to save shipping cost, but as different request, express and other terms also available.
8 Q:What is your terms of delivery?A: EXW, FOB, CFR, Smooth transmission harmonic motor robot harmonic drive gearbox servo motor harmonic CIF.
9 Q: Do you test all your goods before delivery?A: Yes, we have 100% test before delivery

air-compressor

How to tell if your driveshaft needs replacing

What is the cause of the unbalanced drive shaft? Unstable U-joint? Your car may make clicking noises while driving. If you can hear it from both sides, it might be time to hand it over to the mechanic. If you’re not sure, read on to learn more. Fortunately, there are many ways to tell if your driveshaft needs replacing.

unbalanced

An unbalanced driveshaft can be the source of strange noises and vibrations in your vehicle. To fix this problem, you should contact a professional. You can try a number of things to fix it, including welding and adjusting the weight. The following are the most common methods. In addition to the methods above, you can use standardized weights to balance the driveshaft. These standardized weights are attached to the shaft by welders.
An unbalanced drive shaft typically produces lateral vibrations per revolution. This type of vibration is usually caused by a damaged shaft, missing counterweights, or a foreign object stuck on the drive shaft. On the other hand, torsional vibrations occur twice per revolution, and they are caused by shaft phase shifts. Finally, critical speed vibration occurs when the RPM of the drive shaft exceeds its rated capacity. If you suspect a driveshaft problem, check the following:
Manually adjusting the imbalance of a drive shaft is not the easiest task. To avoid the difficulty of manual balancing, you can choose to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the weight on the shaft with special tools, or use a robot. However, manual balancers have many disadvantages.

unstable

When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is 0.004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque applied to it is too much for the machine. It might be a good idea to check the tension on the shaft.
An unstable drive shaft can cause a lot of noise and mechanical vibration. It can lead to premature shaft fatigue failure. CZPT studies the effect of shaft vibration on the rotor bearing system. They investigated the effect of flex coupling misalignment on the vibration of the rotor bearing system. They assume that the vibrational response has two components: x and y. However, this approach has limited application in many situations.
Experimental results show that the presence of cracks in the output shaft may mask the unbalanced excitation characteristics. For example, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient response of the input shaft. Figure 8 shows that the frequency of the rotor increases at critical speed and decreases as the shaft passes the natural frequency.

Unreliable

If you’re having trouble driving your car, chances are you’ve run into an unreliable driveshaft. This type of drivetrain can cause the wheels to stick or not turn at all, and also limit the overall control of the car. Whatever the reason, these issues should be resolved as soon as possible. Here are some symptoms to look for when diagnosing a driveshaft fault. Let’s take a closer look.
The first symptom you may notice is an unreliable drive shaft. You may feel vibrations, or hear noises under the vehicle. Depending on the cause, it could be a broken joint or a broken shaft. The good news is that driveshaft repairs are generally relatively inexpensive and take less time than a complete drivetrain replacement. If you’re not sure what to do, CZPT has a guide to replacing the U-connector.
One of the most common signs of an unreliable driveshaft is clanging and vibration. These sounds can be caused by worn bushings, loose U-joints, or damaged center bearings. This can cause severe vibration and noise. You can also feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a bigger problem.
air-compressor

Unreliable U-joints

A car with an unreliable U-joint on the drive shaft can be dangerous. A bad u-joint can prevent the vehicle from driving properly and may even cause you trouble. Unreliable u-joints are cheap to replace and you should try getting parts from quality manufacturers. Unreliable U-joints can cause the car to vibrate in the chassis or gear lever. This is a sure sign that your car has been neglected in maintenance.
Replacing a U-joint is not a complicated task, but it requires special tools and a lot of elbow grease. If you don’t have the right tools, or you’re unfamiliar with mechanical terminology, it’s best to seek the help of a mechanic. A professional mechanic will be able to accurately assess the problem and propose an appropriate solution. But if you don’t feel confident enough, you can replace your own U-connector by following a few simple steps.
To ensure the vehicle’s driveshaft is not damaged, check the U-joint for wear and lubrication. If the U-joint is worn, the metal parts are likely to rub against each other, causing wear. The sooner a problem is diagnosed, the faster it can be resolved. Also, the longer you wait, the more you lose on repairs.

damaged drive shaft

The driveshaft is the part of the vehicle that connects the wheels. If the driveshaft is damaged, the wheels may stop turning and the vehicle may slow down or stop moving completely. It bears the weight of the car itself as well as the load on the road. So even a slight bend or break in the drive shaft can have dire consequences. Even a piece of loose metal can become a lethal missile if dropped from a vehicle.
If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft may be damaged. When this happens, damage to the u-joint and excessive slack in the drive shaft can result. These conditions can further damage the drivetrain, including the front half. You should replace the driveshaft as soon as you notice any symptoms. After replacing the driveshaft, you can start looking for signs of wear.
A knocking sound is a sign of damage to the drive shaft. If you hear this sound while driving, it may be due to worn couplings, damaged propshaft bearings, or damaged U-joints. In some cases, the knocking noise can even be caused by a damaged U-joint. When this happens, you may need to replace the entire driveshaft, requiring a new one.
air-compressor

Maintenance fees

The cost of repairing a driveshaft varies widely, depending on the type and cause of the problem. A new driveshaft costs between $300 and $1,300, including labor. Repairing a damaged driveshaft can cost anywhere from $200 to $300, depending on the time required and the type of parts required. Symptoms of a damaged driveshaft include unresponsiveness, vibration, chassis noise and a stationary car.
The first thing to consider when estimating the cost of repairing a driveshaft is the type of vehicle you have. Some vehicles have more than one, and the parts used to make them may not be compatible with other cars. Even if the same car has two driveshafts, the damaged ones will cost more. Fortunately, many auto repair shops offer free quotes to repair damaged driveshafts, but be aware that such work can be complicated and expensive.

China OEM 2200w3000w electric ATV   drive shaft electric motor	China OEM 2200w3000w electric ATV   drive shaft electric motor
editor by Cx 2023-07-11

Tags:

Front drive line

As one of leading front drive line manufacturers, suppliers and exporters of mechanical products, We offer front drive line and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of front drive line.

Recent Posts