China factory High-Quality Drive Shaft, Left Front Axle for Citroen Evasion 3272L9 CT8737 210052 303054 drive shaft parts

Product Description

Detailed Information 

Description High-Quality Drive Shaft, left front axle for CITROEN EVASION 3272L9  CT8737   21
  • Length: 649mm
  • External gear side: 27
  • Differential side external engagement: 24
  • ABS ring teeth: 48
  • Braking -/driving dynamics: for vehicles with ABS
  • ABS ring diameter: 99mm
  • Joint diameter on wheel side: 90mm
  • Joint diameter on the transmission side: 81mm
Brand SI, PPB, or customized
Packing Neutral, SI, PPB brand packing or customized
OEM/ODM service Yes
Manufacture place ZHangZhoug, China
OEM replacement Yes
Inspection 100%
Warranty 1 year
Certificate ISO9001:2015 TS16949
Payment T/T, PayPal, West Union


FIAT : 9619947580
FIAT : 9619947588
FIAT : 9621456388


CEVAM : 06433
CEVAM : 06471
CEVAM : 121225
CEVAM : 121226
CEVAM : 121455
CEVAM : 170140
CEVAM : 18161101
CEVAM : 2571
CEVAM : 300321
CEVAM : 3064750
CEVAM : 92571
CEVAM : C1342
CEVAM : CI3103
CEVAM : F1342
CEVAM : FI3216
CEVAM : 3064358
CEVAM : P1342
CEVAM : PE3131
CEVAM : T29091A
CEVAM : T6108
CEVAM : T6116
CEVAM : T6263
CEVAM : T6267
CEVAM : T6346
CEVAM : 303056
CEVAM : T6580
CEVAM : TC1342
CEVAM : L2242
CEVAM : LA3154

Car Application


CITROEN  EVASION MPV (22, U6) 1.8 1997-2002 LFZ (XU7JP) 1761 73 MPV
CITROEN  EVASION MPV (22, U6) 2.0 16V 2000-2002 RFN (EW10J4)  1997 100 MPV
CITROEN  EVASION MPV (22, U6) 2.0 16V 1998-2000 RFV (XU10J4R) 1998 97 MPV
CITROEN  EVASION MPV (22, U6) 2.0 GLX 1994-2002 RFU (XU10J2/C) 1998 89 MPV
CITROEN  JUMPY (U6U_) 1.6 1995-2000 1580 SPI,220 A2. Bus
CITROEN  JUMPY (U6U_) 1.9 D 70 1998-2003 WJY (DW8B),WJZ (DW8) 1868 51 Bus
CITROEN  JUMPY (U6U_) 2.0 2000-2006 RFN (EW10J4) 1997 100 Bus
CITROEN  JUMPY (U6U_) 2.0 i 16V 2000-2006 RFN (EW10J4) 1997 102 Bus
CITROEN  JUMPY Platform/Chassis (BU_, BV_, BW_, BX_) 1.9 TD 2000-2006 WJY (DW8B) 1868 51 Platform/Chassis
CITROEN  JUMPY Platform/Chassis (BU_, BV_, BW_, BX_) 2.0 2003-2006 RFN (EW10J4) 1997 100 Platform/Chassis
CITROEN  JUMPY Van (BS_, BT_, BY_, BZ_) 1.6 I 1995-2000 1580 SPI,220 A2. Van
CITROEN  JUMPY Van (BS_, BT_, BY_, BZ_) 1.9 D 70 1998-2006 WJY (DW8B),WJZ (DW8) 1868 51 Van
CITROEN  JUMPY Van (BS_, BT_, BY_, BZ_) 2.0 i 16V 2000-2006 RFN (EW10J4) 1997 102 Van
PEUGEOT  806 (221) 1.8 1995-2002 LFW (XU7JP) 1761 73 MPV
PEUGEOT  806 (221) 2.0 1994-2002 RFU (XU10J2) 1998 89 MPV

Company Profile

ZheJiang Mighty Machinery Co. Ltd is a professional manufacturer of auto bearings for more than 20 years. We provide a one-stop service for our customers. Our main products include wheel bearings & hub assembly, belt tensioners, clutch release bearings, and other parts.

Relying on the professional and rich manufacturing experience and many substantial factories which stable cooperated for many years, Mighty suppliers customers high-quality products at very competitive prices.


Customer satisfaction is our First Priority, We adhere to the concept of ” Quality First, Customer First”. We will continue to provide high-quality products and the best services to our customers and build up CZPT long-time friendship partners.

Our Advantage

More than 20 years of manufacturing and exporting experience
OEM manufacturing available
Full range, large stock
Quickly feedback
One year warranty
One-stop service
On-time delivery

Packing & Shipping


1. What‘s the minimum order quantity?

We don’t have the minimum order quantity. We can also provide free samples, but you need to pay the freight.

 2. Do you provide ODM&OEM order service?

Yes, we provide ODM&OEM services to customers around the world, and we can customize different brands and different sizes of packaging boxes according to customers’ requirements.

3. After-sales service and warranty time

We guarantee that our products will be free from defects in materials and workmanship within 12 months from the date of delivery. The warranty is void due to improper use, incorrect installation, and physical damage.

4. How to place an order?

Send us an email of the models, brand, quantity, consignee information, model of transportation, and payment
Confirm payment and arrange the production.

5. What are your packing conditions?

We use standardized export packaging and environmental protection packaging materials. If you have a legally registered patent, we will package the goods in your brand box after receiving your authorization

6. What are your payment terms?

T/T is 30% of the payment in advance and 70% balance before delivery. Before you pay the balance, we will show you photos or videos of the products and packaging.

7. How long is your delivery time?

The delivery time of the sample order is 3-5 days, and that of a batch order is 5-45 days. The exact delivery time depends on the item and the quantity you ordered.

8. Do you test all products before delivery?
Yes, according to ISO standards, we have professional Q/C personnel, precision testing instruments, and an internal inspection system. We control the quality of every process from material receiving to packaging to ensure that you receive high-quality products

After-sales Service: One Year
Warranty: One Year
Condition: New
Certification: CE, ISO
Structure: Single
Packing: Neutral, Si, Ppb Brand Packing or Customized
US$ 50/Piece
1 Piece(Min.Order)

Request Sample



Customized Request


Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!


If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China factory High-Quality Drive Shaft, Left Front Axle for Citroen Evasion 3272L9 CT8737 210052 303054   drive shaft parts	China factory High-Quality Drive Shaft, Left Front Axle for Citroen Evasion 3272L9 CT8737 210052 303054   drive shaft parts
editor by CX 2023-07-11

Front drive line

As one of leading front drive line manufacturers, suppliers and exporters of mechanical products, We offer front drive line and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of front drive line.

Recent Posts